It seems like every shower has its own unique way of controlling water temperature and pressure. Of all the showers I’ve ever used, no two of which have ever been alike, I like my controls the least. Plus the faucet has started dripping lately.
Is this likely to be something I can replace on my own, without a plumber? To me, that means: Can I likely do this without damaging the wall, without having to mess with pipes, and without needing to do anything involving words like “hacksaw”, “weld”, or “plumbing torch”?
Basically I believe in my ability to buy a faucet and control thingie from Home Depot; to use screwdrivers, allen wrenches, pliers, and regular wrenches; to use things like plumbing tape, lubricants, and caulk; and to remember to turn the water off to the house.
Would a project like this likely require anything more complex than that? I tend to prefer shower controls that have separate knobs for hot and cold, but I figure going from a one-knob setup to a two-knob setup is definitely going to require reconfiguring the plumbing. Should sticking with a one-knob solution be okay?
I don’t know if it matters but I live in Florida in the US, and this place was built in the 1980s. I doubt this matters, but my current controls work by turning the larger knob left or right for temperature, and the smaller knob for pressure.
My place does have some annoyances - like the front door is an uncommon size that’s difficult to find replacements for at places like Home Depot. Is there any chance of me running into issues like that when it comes to things like the size of the pipe openings?
Thanks for any insight.
Edit: Thanks for all the replies. It’s pretty clear now that this is something that could very easily end up a lot more involved and time consuming and property damaging than I’m comfortable with.
So there are definitely two things I don’t fuck with and I’ll call a professional for it.
Plumbing and electrical.
You can learn to do these things yourself but unless you’ve decided to fully commit yourself to these crafts you’re just better off hiring someone.
I had a contractor replace an older faucet a few years ago. He opened up the wall and found older, very brittle plastic pipes, I don’t remember what exactly but they are not modern PVC. He was able to replace the faucet and fix the leak that precipitated the visit, but was emphatic that further leaks and issues were likely.
With an older fixture like that, after learning this, I wouldn’t touch it.
My home was built in the late 90’s.
an older fixture like that…My home was built in the late 90’s.
Somehow I don’t think you meant 1890’s. As someone born in 1954, it’s really hard to realize that things which were built long after I became an adult are, nonetheless, now considered “older”. sigh
I was born in 1982 and am turning 41 shortly, starting to feel out of touch and cringey myself.
Also I have teenage kids and you could easily be one of my parents. How’s that for a blow? 😁
This kind of shower controls are the best. I had this on my shower but right now my place is gutted for a remodel. I really want to get the same exact kind that you have. It’s super convenient because you set the temperature once and then adjust the pressure separately. You don’t have to constantly tune it to the right temperature with every shower.
I’m not very handy, but I learn when I need to.
For reference, I replaced the belt in my dryer last night. It took me 3 hours, I had to look up a few videos, I cut up my hand, and had a few “extra” screws at the end. But, the dryer works!
I’ve replaced the knobs and spout on my shower, and it wasn’t hard at all. You just pull them off, and pop on the new ones. If you are trying to change anything about the pipes behind that, I’d call someone.
If you fiddle with anything electrical turn off the breaker/remove the fuse and wear protection, anything plumbing turn the shutoff valve and ensure the tap runs dry.
If you are:
- close to a well-stocked plumbing supply store you will make a few trips to *willing to potentially go a long weekend without a working shower and water
- ready to call a plumber anyway after trying if you fuck something up
- just wanting to replace with a compatible cartridge (which may not be easy to find/identify, and replacment options might be uglier), for anything at/behind the wall just call the plumber
- wanting to spend a few hours reading guides and watching 360p video tutorials
Then I say give it a shot.
deleted by creator
Hehe. I remember when the maintenence dude who claimed to know plumbing came and said “we don’t need to turn off the water valve to replace that faucet” and started work. I was on the phone to the super in a minute complaining that that idiot was about to flood my apartment. Then he did. Idiot didn’t get fired somehow.
Same idiot dropped an oven three stories onto my neighbor’s car. Somehow that didn’t get him fired either. I don’t now how he had that job.
deleted by creator
Do you know where your water main turnoff is?
Do you know a local plumbing supply you can buy from instead of Home Depot? I’ll never buy a faucet from HD.
I do - I’ve used it a few times. The most involved plumbing I’ve done is installing a bidet, and installing a garbage disposal, though. From all the other comments it seems like this has the potential to get significantly more involved.
Yeah it’ll be a progression from there but watch a few YouTube videos for examples and you’ll figure it out.
I won’t mess with plumbing again after trying to replace my kitchen faucet only to discover that the shutoff was old and busted the moment I turned the knob, leading to water spraying out everywhere. Called in a plumber to fix it and it took him several hours to resolve–no chance I had the knowledge, skills, and tools to fix that.
Every plumbing project no matter how small has resulted in me having to turn the water off to most or all of my house for 3 to 6 hours…
I just always seem to hit random unexpected things. So if you’re willing to spend the entire day working on it, make 2 trips back to the hardware store after your initial purchase and family can go without water for a half a day, go for it! Otherwise call a plumber, they will have anything they possibly need in their truck and will be done before you go back to the hardware store the second time.
Oh and make sure your comfortable soldering, just in case… It’s not difficult, but for some reason it scares people.
I replaced my shower valves with nicer looking ones. It is much more involved than changing a sink faucet, I did several of those before attempting this.
Easiest way is if you have access to the wall behind the shower controls. You cut out a square of drywall at the studs and tada, you can see the pipes. Hopefully you have copper pipes, you can sweat off the old connections and sweat on the new ones. You may have to shorten or lengthen (replace) some of the pipes because the new fitting connections are not in exactly the same spot. Leak test, fix any leaks you find, repeat until it runs dry on the outside.
If the wall is in a closet you can use a removable cover for easy future access. If it is a visible wall you’ll have to reinstall the square of drywall, tape and mud the seams, sand, paint.
deleted by creator
To fix the leak and possibly replace the handle if you’re interested check this video. It may not feature your exact model but it will give you an idea of what you’re in for. I did this myself on both of our bathrooms at our old house with no issues.
https://youtu.be/MkPcCmYkG4Q?si=_VryQ6uZmwpj3lom
As far as reconfiguring the type of mixing etc… others have explained it pretty well. to me it would be a definite “call a plumber moment.”
Removed by mod
