I was troubleshooting Bluetooth connection today and I thought that this is somehow related to software (PipeWire, bluez, bluetoothd and all that stuff). But no. Apparently Bluetooth barely works when WiFi antenna is disconnected from my ASUS motherboard.

Anyway, this might save a lot of time for someone, so I’m posting it here.

  • Luci@lemmy.ca
    link
    fedilink
    English
    arrow-up
    90
    ·
    7 months ago

    Wifi and bluetooth are often on the same chipset and share the antenna. You’ll see this on embedded devices as well.

    • bjorney@lemmy.ca
      link
      fedilink
      English
      arrow-up
      42
      ·
      7 months ago

      To add: Bluetooth and WiFi both use the 2.4ghz spectrum. They are on the same chipset because otherwise you would need two antennas

    • Magister@lemmy.world
      link
      fedilink
      English
      arrow-up
      22
      ·
      7 months ago

      same frequency, 2.4GHz, same antenna, quite often for chip that does dual wifi/BT the antenna is shared

    • maniacal_gaff@lemmy.world
      link
      fedilink
      English
      arrow-up
      1
      ·
      7 months ago

      Did that knowledge indicate how cell phones, which are much smaller than a desktop PC, obviously don’t require visible external antennas to get WiFi and Bluetooth?

      • Rentlar@lemmy.ca
        link
        fedilink
        English
        arrow-up
        2
        ·
        7 months ago

        Yeah I don’t blame people for not knowing since manufacturers hid them these days. Even wireless earbuds happen to have antennas covertly tucked in their tiny packages.

  • guyrocket@kbin.social
    link
    fedilink
    arrow-up
    9
    ·
    7 months ago

    Huh. Interesting.

    I never connected my “wi fi” antenna because I use a wire for the interwebs.

    I would NOT have guessed that it is also used for bluetooth. I might use bluetooth.

    Thanks!

    • Riven@lemmy.dbzer0.com
      link
      fedilink
      English
      arrow-up
      1
      ·
      7 months ago

      I usually connect it as a backup/so I don’t lose the antenas but im also mostly wired. Good to know that it helps with my Bluetooth as well. Being able to easily hookup your phone to pc via Bluetooth is underrated. Especially via the phone link windows app, so many features and things you can do when you have em hooked up.

  • folkrav@lemmy.ca
    link
    fedilink
    English
    arrow-up
    8
    ·
    edit-2
    7 months ago

    Most of the time Bluetooth and Wifi are provided by the same chip. Bluetooth runs on 2.4GHz, like WiFi up to N-band.

    Edit: I’m too slow, looks like!

  • ferret@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    7
    ·
    7 months ago

    It would be a waste to give them separate antenna, they both operate on the same frequency (and often with the same radio, although the BT side of an m.2 card is often supported by usb instead of pcie)

    • Neato@ttrpg.network
      link
      fedilink
      English
      arrow-up
      1
      ·
      7 months ago

      You can probably stick the antenna on the back of the base so it’s not easily visible. Or get a separate one that’s a lot smaller.

      • fredhampton@sh.itjust.works
        link
        fedilink
        English
        arrow-up
        1
        ·
        7 months ago

        There’s already a lot of interference. Couldn’t do a smaller one or put it anywhere close to the psu unfortunately

    • Unforeseen@sh.itjust.works
      link
      fedilink
      English
      arrow-up
      1
      ·
      7 months ago

      I had the same problem too, I ended up buying a USB Bluetooth transmitter. I figured the board was bad until I replaced it and had the same problem with the new one

  • CatZoomies@lemmy.worldM
    link
    fedilink
    English
    arrow-up
    4
    ·
    edit-2
    7 months ago

    Ugh - same here! I found this out maybe 6 months ago. Several years ago, I put together a moderate gaming PC to use on the family room TV. My spouse and I wanted to play Stray on release and figured this was the best way to go. The bluetooth was so spotty with our Xbox Series controller we had to sit really close to the TV and near the computer in order to play this game. It wasn’t the best experience playing since sometimes the controller would disconnect, but it was a great game nonetheless!

    What was interesting at the time was that my spouse had asked, isn’t there supposed to be an antenna for the wifi, maybe that’s why the bluetooth isn’t working well. And me being dumb and relying on old knowledge, told my spouse, “It’s just for the wifi, not bluetooth, so that won’t help us here.”

    Flash forward to 6 months ago, and I was reading the manual for the Gigabyte motherboard and discovered I need to plug that antenna in. I made sure to talk to my spouse and tell them they were right, so they certainly rubbed it in that they were correct (playfully of course)! :)

    Good reminder that it’s good to always read manuals because of things like this!

  • LucidNightmare@lemmy.world
    link
    fedilink
    English
    arrow-up
    2
    ·
    7 months ago

    Has anyone else had an issue using a USB Bluetooth device, and if you turned off the motherboard Bluetooth, the USB didn’t work either? That happened to me when I was using it, at least. Now, I haven’t tried since then, so I could be wrong now.

    • tomatol@lemmy.world
      link
      fedilink
      English
      arrow-up
      1
      ·
      7 months ago

      On Linux I managed to disable the motherboard’s Bluetooth because it showed up as a usb device and then I’m able to use a dongle just fine.

    • Blaster M@lemmy.world
      link
      fedilink
      English
      arrow-up
      1
      ·
      7 months ago

      There’s sometimes conflicts when both BT devices have the same supporting chipset. It’s why I don’t like integrated wifi on motherboards - I can’t upgrade the thing to a newer spec due to hardware conflicts that arise (blame Intel and their drivers)