Don’t forget about FreeCad!

They had an update earlier this year that really closed the gap on a lot of features and tools they were missing compared to other more established cad packages.

My smart watch recently died and I found myself quickly glancing at my bare wrist then surveying my surroundings for a clock only to check my phone as a last resort. Before my smart watch, my phone was my default but I’d still see clocks, read them… and then check my phone immediately after.

Things like flyers, posters, communication boards etc, have completely blended into the scenery for me for as long as I can remember. Unless the active task is waiting with little to no distractions or entertainment I won’t notice them.

Dogfish head 90 minute aged for 3 years in a Sam Adams utopia barrel from 2019.

Not the most expensive thing I’ve drank but it was the most expensive beer I paid for.

I had gotten a 1 gal refillable mini keg filled from a local distributor and went back the next week for another so I’d say it was worth it.

Looks like the filters get defaulted to pla and petg, and a lot of vendors dont make the default cut when following the link, but there are several matching options for abs and asa.

SO MUCH FLOOF!

Is this the Yule cat?! I forgot about Christmas in July!

She is very polite and will lightly paw at my face if I don’t wake up right away

Yeah thats accurate

Dios mio, El Chupacabra!

That’s correct. Creality jumped in the game after and took advantage of a lot of the work prusa and the open source community did to make printers much more affordable with the ender series. That drew a lot more people into the community like myself, but nowadays I’d say steer clear of them for a number of reasons.

Bonus history, Naomi Wu is/was a huge maker from China who was able to push development on the cr-30 print mill. The print mill is almost literally just a small tread mill with the gantry on an angle that “shines” in batch printing and theoretically infinitely long parts. From my experience though its even finickier than an old ender and poses some additional design considerations. I think it’s super cool conceptually though and very satisfying to get successful parts off of, but could really only recommend to enthusiasts with lots of time and disposable income.

Unless you have lots of technical skills and patience i wouldn’t recommend it especially not for a first printer… but something worth considering down the road for the open source aspect would be a voron.

The Voron team has designed a few different printer variations and released the bill of materials and software documentation for you to source all the parts needed to build a printer from the ground up. Companies on Ali express sell kits to make it a little easier and cheaper but again, you are building it from the ground up.

If that sounds interesting I would still highly recommend starting with something a little cheaper like the elegoo CC (1 or 2) to get used to printing and see how much you like it.

Whatever you decide is right for you though I hope you and your wife really enjoy the hobby!

Thank you! Thats actually my sister but I’ll let her know.

Sometimes they’re blue

Looks like theres some other advice I’d try first but have you checked/calibrated the e-steps?

Esteps are easy to check, use a fine scale or calipers and a sharpie to mark the filament 100 & 110mm before it enters the hot end and then jog the extruder 100mm and measure how much it has actually extruded.

Tutorial here that covers pretty much every way to cal the steps but I suggest skipping from the set up down to the calculation and then to the “cowboy method” https://all3dp.com/2/extruder-calibration-calibrate-e-steps/

If that doesn’t seem to be the culprit you could try keeping an eye on it when you have time to see if material keeps oozing a little when the nozzle reaches the end of a tool path or during a travel. If so you can try tinkering with coasting and retraction settings. If defects seem to occur more during travels there are settings to avoid traveling over printed areas or you can try enabling z-hops.

Oo thats a good one! After the holiday season when boxes are bigger and bountiful I often have to play Schrödingers boxes and try to guess if its safe to move and break a box down or if there’s a cat in it.

My go to prank when people are around involves my big orange floof I call Ra. I carried him all around in the palm of my hand when he was kitten and well that didn’t really change once he got bigger other than using 2 hands sometimes. He basically sits his front legs in one hand and rear in the other like a pampered loaf. He’s got enough floof to hide my hands though so anytime I’d hear someone get home or approaching from around a corner I’d hide behind the corner and stick him out just far enough so it looks like he’s floating in mid air. My sister started calling him hover cat.

Breathes heavily in British So what do you want for him?

Im just going to leave this here

https://m.youtube.com/watch?v=MpeOFvxor_0&pp=ygUOZmVybiB3aWtpcGVkaWE%3D

Im picturing a ferral dog the bounty hunter held up just beyond the sign

Driftwood Blind