So for example if you updated the file and need to re-upload it, there is no way for you to delete the previous one.

if this is something you’d fancy then copyparty might be worth a look – it lets uploaders undo their own uploads within a configurable timeframe, even in folders where they only have write-only access (the ability to upload files without seeing existing files).

disclaimer: I’m the author – and also thrilled to see someone else suggesting it in the thread!

So I realize the following does not directly apply in this specific case, since we are talking about a full android app. But in general, there are strictly technical limitations which absolutely requires you to use https. This for example applies to PWA’s, and it also applies to apps which are WebView-based.

Basically the w3c is disagreeing with you; there are several important javascript features which are forcefully disabled if you are not connecting over https. This is a decision made by the webbrowser itself, and not something you or the dev can disable or otherwise avoid.

For example, it is impossible to use the browser’s built-in api for getting the sha512 hash of a file, which is why i had to go through great pains to do that in other suboptimal ways in one selfhosted service i made. Most devs rightfully wouldn’t bother, since those restrictions are arbitrary and effectively pointless, as there are (usually painful) workarounds.

List of features which require https: https://developer.mozilla.org/en-US/docs/Web/Security/Secure_Contexts/features_restricted_to_secure_contexts

It depends who you ask (which we can already tell hehe), but I’d say YES, because you’re the one running the show – you’re free to grab all of your bits and pieces at any time, and move to a different provider. That flexibility of not being locked into one specific cloud service (which can suddenly take a bad turn) is what’s precious to me.

And on a related note, I also make sure that this applies to my software-stack too – I’m not running anything that would be annoying to swap out if it turns bad.

Hadn’t heard about PirateBox before – love the concept, but nah aside from a small amount of overlap they’re very different things :-)

When users join the PirateBox wireless network and open a web browser, they are automatically redirected to the PirateBox welcome page. Users can anonymously chat, post images or comments on the bulletin board, watch or listen to streaming media, or upload and download files inside their web browser.

I guess if you put copyparty on a raspberry pi (or boot the copyparty live-cd on a nuc) then you get something vaguely similar – a wifi node where you can download and upload files, but none of the other stuff (chat, messageboard, captive portal). Maybe cool ideas for future spinoff projects hehe

Mind if I suggest my own software, copyparty?

Regarding authentication, someone who has an account (in this case just yourself) can create password-protected shares which other people can browse, or upload, or browse+upload to (configurable when creating the share).

There is WebDAV support, and it should integrate well enough with shares, but I haven’t tested that specifically.

It has photo and video thumbnails, and a basic image-viewer, and with some elbow-grease it can also show exif-tags (gps-coordinates etc).

There is also optional file dedup, so if two people upload the same file, it’ll detect and skip that during the 2nd upload (doesn’t waste any bandwidth) and swap out the new file with a symlink to the existing one. Default disabled to avoid surprising someone with symlinks.

I think the following command would be enough to get you started:

wget https://github.com/9001/copyparty/releases/latest/download/copyparty-sfx.py
python3 copyparty-sfx.py -a sintan:yourpassword -v .::A,sintan --shr=/shr -e2dsa -e2ts

but since that’s entirely unreadable, you can do it with a config file instead,

[global]
  e2dsa  # enable filesystem indexing 
  e2ts  # enable media indexing (music tags)
  shr: /shr  # enable shares under this url

[accounts]
  sintan: yourpassword 

[/]  # create a volume at this url
  /srv/share/partypics  # the filesystem path to share
  accs:
    sintan: A  # give sintan read-write-move-delete-admin

and use it like this:

python3 copyparty-sfx.py -c the.conf

there’s another example here and here for inspiration.

off topic, but out of curiosity - why ogg (presumably vorbis) in favor of opus? maybe old devices or players, or just haven’t made the change yet?

opus is also a xiph project, and is almost entirely transparent at “128kbps” (it’s a misnomer for the q4 of vorbis), so it uses way less space for the same quality. I warmly recommend giving it a try if you haven’t already.

one of the main reasons SQLite is gaining in popularity is because people are realizing it has higher performance than separate databases in many usecases. Keeping the communication in-process cuts a lot of overhead (network, memcpys). The fact that you also don’t have to go through the trouble of configuring a separate service is just a bonus :-)

combine it with a service for uploading files to your server, there’s dozens of those

Alpine also has the advantage of musl, which is a safer alternative to glibc, at the cost of some performance. So, if anything, I’d expect people to consider alternatives to Alpine for that reason, as alpine is already the best choice for security.

good idea, but a slight correction - mDNS and SSDP are entirely different things, rather SSDP was Microsoft’s initial proprietary take on the idea, and mDNS was created as the new and improved standard.

mDNS does multicast (send/receive) on 224.0.0.251 and ff02::fb on port 5353, while SSDP uses 239.255.255.250 on port 1900 as you mentioned.

But I think OP’s issue is that they’re on different subnets; mDNS expects the server and the client to have a perfectly overlapping subnets inside the same LAN. If the server has 10.0.0.3/16 and 192.168.1.3/24 then the client must also have 10.0.0.7/16 and 192.168.1.7/24. Or, if you can tell the server software exactly which IPs to announce, then that might work too.

there are workarounds to this, using avahi reflector, but that thing is buggy – specifically you need to disable NSEC on the server, and lock it to either IPv4 or IPv6.

I made some note on additional pitfalls while i was writing my own mDNS and SSDP servers for fun, they’re at the bottom of this page: https://ocv.me/copyparty/helptext.html

Absolutely; if I was a company, or hosting something important, or something that was intended for the general public, then I’d agree.

But I’m just an idiot hosting whimsical stuff from my basement, and 99% of it is only of interest for my friends. I know ~everyone in my target audience, and I know that none of them use a VPN for general-purpose browsing.

As it is, I don’t mind keeping the door open to the general public, but nothing of value will be lost if I need to pull the plug on some more ASN’s to preserve my bandwidth. For example when a guy hopping through a VPN in Sweden decides to download the same zip file thousands of times, wasting terabytes of traffic over a few hours (this happened a week ago).

and filtering malicious traffic is more important to me than you visiting my services, so I guess that makes us even :-)

I’ve started blocking entire AS from my servers; since I only expect/want traffic from home ISPs it’s kinda alright, but still… man

HFSv2 (the windows exe) has publically known unfixed vulnerabilities! Please upgrade to HFSv3 (nodejs, crossplatform). I’m also maintaining a list of other alternatives; https://github.com/9001/copyparty/blob/hovudstraum/docs/versus.md

You could always toss it in a sandbox for some isolation :> but yeah I get you, all of the optional features does mean more code.

It’s a shame that browsers make stuff like chunked uploading so tricky, so even just the essentials would be a fair bit of logic – and you won’t get optimal upload speeds without sending chunks in parallel. And the corruption detection is also worth its weight in gold… Ah well, it is what it is hehe

Thanks for the mention :>

Yeah, copyparty was my attempt at solving this issue - a single python-file for receiving uploads of infinitely large files, usually much faster than other alternatives (ftp, sftp, nextcloud, etc.) especially when the physical distance to the uploader is large (hairy routing).

I’m not gonna put an upload on my site, that’s a security nightmare waiting to happen.

curious to hear your specific concerns on this; maybe it’s something that’s already handled?

You may encounter some confusing errors with MergerFS; depending on your config, any software using SQLite may crash with a scary-sounding “disk I/O error”. The quickstart has more info, https://trapexit.github.io/mergerfs/quickstart/

for a selfhosted service which is a single self-contained process in a single container, is there still a benefit to using compose, and if so, what would that be? genuine question since I’m not providing a compose example for a foss service I made.

Awesome!! And thanks for mentioning the traefik thing; I added it to the example so maybe it’ll help somebody else one day :>

hey, copyparty dev here - I’ll be upfront and warn that if you’re looking for a service to do full bidirectional file syncing, with proper file tracking and versioning, then something like syncthing is a better choice. Copyparty is able to do single-direction syncing of local folders to the server pretty well (using copyparty’s u2c or rclone), but that’s about it.

But if you’re looking for something to handle file uploads faster than many alternatives, or any of the other features listed in the readme, then I’d be happy to help if you ever get stuck somewhere :>