• Obi@sopuli.xyz
    link
    fedilink
    arrow-up
    7
    ·
    6 months ago

    Yeah TVs/screens for example are typically in inches anywhere I’ve seen. There might also be the metric listed.

    • accideath@lemmy.world
      link
      fedilink
      arrow-up
      15
      ·
      6 months ago

      They are indeed usually in inches but that’s probably bleeding back to Europe from the US. And most people don’t actually know how much that would be in metric. It’s sometimes listed but no one I know actually uses those numbers. We just know that 65 is bigger than 55, etc. If we want to know if it fits in our living rooms, then we look at the actual size in cm. I also couldn’t think of anything else that’s imperial, at least here in Germany.

    • 30p87@feddit.de
      link
      fedilink
      arrow-up
      4
      ·
      6 months ago

      Rims are also commonly referred to in inches, at least in germany. But just as with screen sizes, it’s 50/50 with cm, the latter being more useful especially with screens.

        • Captain Aggravated@sh.itjust.works
          link
          fedilink
          English
          arrow-up
          1
          ·
          5 months ago

          At least in the United States, tire sizes are a goofy mixture of the two, plus an indirect measurement.

          A 205/75R15 tire is 205mm wide bead to bead, fits a 15 inch diameter rim, and is 153.75mm from bead to tread (75% of its width).

          • Kecessa@sh.itjust.works
            link
            fedilink
            arrow-up
            1
            arrow-down
            1
            ·
            5 months ago

            Yes, the measurement system is the same everywhere and you need the wheel size somewhere in there, but the size of the tire (if you were to take a slice of its profile) is in metric.

            • Captain Aggravated@sh.itjust.works
              link
              fedilink
              English
              arrow-up
              1
              arrow-down
              1
              ·
              5 months ago

              No, like I said, tires are sized in both. The width of the bead is given in millimeters, the diameter of the bead is given in inches, and the height of the sidewall is given as a percentage of the width aka Aspect Ratio.

              • Kecessa@sh.itjust.works
                link
                fedilink
                arrow-up
                1
                arrow-down
                1
                ·
                edit-2
                5 months ago

                Cut it and you’re left with a U shaped slice measured in mm (even if it’s a ratio that’s used for both legs, if you apply a ratio to a measure in mm, the result is something you measure in mm). The tire itself is measured in mm and then the last number is the size of the wheel it’s wrapped around.

                That’s the point of view I’m thinking about, the red part is the tire and you only need the first two (metric) numbers to know what it looks like, the wheel size doesn’t influence the width or sidewall height of the rubber.

                Also, past a certain point you’re back to imperial measures (35/13.5 x 20 > height x width x wheel) or you might not even have the height/sidewall at all (14.9-42 is 14.9 width for 42" wheels but that’s mostly for tractors.

    • Possibly linux@lemmy.zip
      link
      fedilink
      English
      arrow-up
      1
      arrow-down
      5
      ·
      5 months ago

      It makes sense as an Inch is a good measurement for that. You aren’t going to use mm or meters