• ColeSloth@discuss.tchncs.de
      link
      fedilink
      English
      arrow-up
      7
      arrow-down
      3
      ·
      25 days ago

      It really wasn’t. He went sideways because he was hitting his brakes after it started to go sideways.

      • Brown5500@sh.itjust.works
        link
        fedilink
        English
        arrow-up
        11
        ·
        25 days ago

        Should he have just coasted all the way down the hill? How fast would he be going by then? He seemed to do a pretty good job of braking as much as possible while still being able to steer enough.

        • ColeSloth@discuss.tchncs.de
          link
          fedilink
          English
          arrow-up
          4
          arrow-down
          1
          ·
          24 days ago

          Him going sideways meant his braking wasn’t working. If there’s slipping you want to let off the brake and down shift (you can do this in automatics) to the lowest gear that doesn’t make you slip. Staying straight to where your wheels aren’t slipping is a priority over braking or getting slower. The only way of slowing is to have traction, and you don’t want it while sideways.

          I would have tried keeping straight and then veered over into the dry lane and started slowing down.

        • TheRealKuni@lemmy.world
          link
          fedilink
          English
          arrow-up
          3
          ·
          24 days ago

          Put it in a low gear. The engine will slow the vehicle and prevent you from gaining too much momentum while still allowing you to control it.

          He didn’t do a terrible job though, especially if there were cars ahead of him.

          • AwkwardLookMonkeyPuppet@lemmy.world
            link
            fedilink
            English
            arrow-up
            4
            ·
            25 days ago

            Do you have the guy in back steering the rear wheels? That style of truck used to be commonplace when I was a kid, but I haven’t seen one in a long time.

            • ColeSloth@discuss.tchncs.de
              link
              fedilink
              English
              arrow-up
              3
              ·
              24 days ago

              They’re called tillers. The steering radius advancements and ladder construction allowed for shorter trucks that could turn tight enough to stop needing tillers in most areas. They’re still in a lot of narrow and tight big cities like Kansas city, MO. The city I work at is also actually planning on getting one in about 5 more years, so they are still in demand. It’s just that they aren’t needed a lot of times, now.